I made valve chest lids from t2 brass plate.
t2の真鍮板から弁室の蓋を作る。
Front valve chest fixing screws are M2X12. For rear side M2X14 was required. But I could not get the size and had to shorten them with cutting grinder of a rotary tool.
弁室固定ネジは前部はM2X12。後部はM2X14だがM2X14のキャップネジが無いのでM2X15をロータリーツールの切断グラインダーでつめた。
Assembled cylinder blocks.
i一応組み上がったシリンダーブロック。
They were mounted to the frame.
台枠に取り付けてみた。
Gland nuts were turned.
グランドナットを作る。
Mostly finished cylinder blocks.
シリンダーブロックほぼ完成。