Material of the motion plates was 3.2mm brass plates soldered together. The way of construction was different from the textbook.

モーションプレートの材料。3.2mmの真鍮板を二枚半田付けし、周囲を仕上げたものです。
なお、この作り方は教科書の作り方と全く異なります。

Necessary holes and taps were doen.

必要な穴あけ完了。

Angled parts were milled.

斜めの部分を切削。

The material was saw-cut to two pieces.

切削後、切断。

Ends were rounded.

端部を丸め。

Parts were unsoldered.

半田をはずして、分離。

The motion plates were aligned using 3mm SUS rod.

3mmのSUS棒を通して、位置合わせをします。これでモーションプレート完成。