|
I installed the lifting arms and links. Damn, lifting and expansion links interfered!
組み立ててみるとリフティング・リンクがイクスパンション・リンクに当たってしまうではないか!
|
|
So I made spacers for lifting arms.
しょうがないのでスペーサーを追加。これでOKになりました。
|
|
Weight shaft bearings were made from brass. Bearing fixing bolts were home made M2 hex head screws.
なお、逆転機ロッドの軸受けは真鍮とし、自作M2六角ボルト止めとしました。
|
|
Next one made was reverse lever arm and this was much easier than lifting arms.
次はリバースレバー・アームです。リフティング・アームよりはるかに簡単です。
|
|
I used off cut from lifting arms. It was fixed like this.
リフティング・アームで余った材料をこのように固定し。
|
|
|
|
This was the result of saw cut.
こんなものができます。
|
|
The boss was turned out.
ボス部を旋盤で切削。
|
|
Ends were rounded to finish.
端を丸めればリバースレバー・アームは完成です。
|