Sanding the edges of thin styrene strip is not so easy. I made a jig like this. The slot is set at 1mm the thick ness of material I use the most.

帯材の端面のサンディングってすぐに帯材が寝てしまうので結構面倒です。そこで左のようなジグを作りました。

Just put a strip through the slot provided and put a sanding block on it. Pull the strip by your hand. That's it!

使い方はジグの隙間に帯材を通してサンディングブロックで押さえ手で引き抜くだけです。とても簡単にできます。


 

 
inserted by FC2 system