I baked it six times up to this stage, feet & legs, hands, jacket, tie & shirt, head, and hat.
Um, his hat seems too large like a communism countries army hat. Also his face does not seem Japanese.

ここまでに靴と足、手、上着、ネクタイとワイシャツ、頭、帽子と都合6回焼いています。
う〜〜んちょっと帽子がでかすぎるな。こまわり君(古いかな?)か共産国の軍帽みたいだ。それに顔が日本人っぽくない。

I observed my family's faces and many photos, and realised Japanese faces are flatter and having higher cheeks. Following the articles in myLargescale.com makes western faces. The method shown in these articles are not applicable at all concerning about the faces in my case.
I sanded down the hat and made the cheeks bit higher.

いろいろ観察してみると日本人の顔って平たくて、絶壁で、ほっぺたがかなり出ています。myLargescale.comの記事どおりに作るとどうしても西洋人の顔になってしまうので、この記事の顔の作りかは一切無視することにします。帽子を削ってほっぺたを盛り上げて少しは日本人ぽくなったかな?

I have used clay “Sculpey III.” However I found Sculpey III is too soft to work with when making small and delicate objects like hands and faces. I found an online shop handles “Premo!” (Recommended by myLargescale.com article). I also ordered “Liquid Sculpey” to reconnect broken limbs. “Premo!” is much easier to handle when making small objects. I strongly recommend it over “Scalpey III.”

ところで、今まで使ってきたSculpey IIIというのは、とても柔らかく細かいところを作るのがすごく大変です。myLargescale.comの記事で推薦されていた、Premo!というオーブン粘土を売っている通販屋を見つけたので注文してみました。普通の色、パール、メタリックで硬さが違うというのでおのおの1個づつ買ってみました。メタリックを使った感じは手とか顔とか細かい部分を作るのには硬めでとてもやりやすいです。チューブのはLiquid Sculpeyという液体のやつで腕とかが折れた時の補修用に買いました。

I made some other figures. From the left, the driver of VW van rail car, a passenger (high school student in school uniform), a ticket collector. I will make more passengers.

他にこんなのも作りました。左から、軌道モーターカーの運転手、乗客の中学生、改札係です。他にも乗客を製作予定。


 

 
inserted by FC2 system