|
I wanted to have some knapsacks for figures. Make the core from aluminium foil.
人形の持ち物でリュックサックを作ろうと思います。まずアルミフォイルを丸めて芯を作り。
|
|
Cover the core with oven-bake clay and shape it. I could not find any good reference of knapsacks in 1960's. So the shape is mostly my guesswork.
オーブン粘土で適当に方を作ります。あまりいい資料をみつけられなかったので、ほんとに適当に作りました。
|
|
It seemed buckles were necessary for this sort of knapsack. I made buckle rings from 0.3mm solder by wrapping around 1mm square brass wire.
バックルが欲しいですね。まず、1mmの真鍮角線に0.3mmの半田を巻き付けて、金具を作ります。
|
|
Attach the ring to belt part made from 1mm styrene.
これを1mmのスチロール板から削りだした、ベルト部分に接着すればバックルの出来上がり。 |
|
I needed a couple of them. So I duplicated it by resin.
たくさん必要なので、レジンで複製します。 |
|
Buckles are attached to the knapsack with CA. They seem bit over-sized, but I could not make them smaller with my poor skill and farsighted eyes.
オーブン粘土の本体にレジンの複製を瞬接で接着すればできあがり。バックルがオーバーサイズですが、私の腕と目ではこれ以上小さく作れない。これから型を取りレジンで量産の予定。 |