When I added windowsills and headers to my “gasoline car” I bend the styrene strips by heated screwdriver to fit curved corners. However it was quite difficult and I made a lot of scrap. Especially riveted strips are very brittle at the rivets. This time I decided to bond straight strips and form them by putty.
側板と妻板との角のところのシル、ヘッダーは以前はリベットを打ったスチロール板を熱したドライバーを当てて曲げて作りましたが、これにはとても苦労しました。リベットを打ったところが割れやすくスクラップを量産してしまいました。今回は、曲げずに直線のまま突き合わせて後でパテで整形することにしました。 |