In this case I made the truss bars as trapezium type.
トラス棒は台形にしました。
The roof is cut out from MFD. It is almost finished. I made a chimney for coal stove from 5mm styrene pipes.
屋根も削りだして、もう少しで生地完成です。5mmのスチロールパイプでストーブの煙突も付けて見ました。
I installed roller bearing type trucks. In this case the trucks are screwed bottom. So the stabiliser spring is installed under the bolster.
台車はローラーベアリングタイプの物としました。今回は下からビスで台車を取り付けることにしたので動揺止めのスプリングもボルスターの下になってます。
The model has been made up to this stage. The putty applied at the ends of the roof will take a day to cure completely.
一応ここまでできましたが、屋根の妻部のパテ盛で固まるまで一日かかりそうなので今日はここまで。
Cover the roof with Japaese paper and the carriage is finished without painting.
屋根に紙を貼って生地完成です。