Resin-cast stove.

複製したストーブです。

I made handrail around the stove from 1.5mm brass wire. Horizontal part was annealed for easy bending.

ストーブの周りの手すりは、1.5mmの真鍮線を半田付けして作ります。横棒はあらかじめ焼きなましておいて、後で曲げます。

 

Formed handrail with resin mounting brackets.

適当に曲げて、レジンの固定具を付ければ、手すりは完成。


Tray and heat shield were made from 1mm styrene sheets and 1X1mm styrene rods.

トレイと遮熱版を1mmスチロール板と1X1mmスチロール棒で作ります。、

 

Chimney pipe was made from 5mm styrene rod. I made several cuts at the elbow by copping saw and tapered the cuts by a saw tooth file.

煙突は5mmスチロール棒に糸鋸でいくつか切れ目を入れて、目立てやすりでVに切れ目を拡げます。

  

Bend the elbow carefully and apply plenty of adhesive. I used a tape as a weight to push the elbow part together while the adhesive set.

ゆっくり折れないように曲げてから接着剤をたっぷり塗り、伸びないように重りをかけて乾燥させます。

By adding the chimney pipe the stove was finished.

煙突を2mmのスチロール棒を介して取り付ければ、完成。

The stove is seen through the windows like this.

こんな風に外から見えるわけで、なかなかいい感じです。


 

 
inserted by FC2 system